how to listen dialogic card installed PC surrounding sounds
Dear All ,I decided to write and test an app for remote listening dialogic card installed PC surrounding sounds .It may be useful for control places remotely .I have a D4PCIUFW 4 analog line card .Is...
View Articlegc basic call
Hi,i'm new to dialogic i'm trying to do gc_basic_call when i type 'make all' it showing "cc gc_basic_call_model.o -L/usr/dialogic/lib -lgc -o gc_basic_call_model/usr/bin/ld: skipping incompatible...
View Articleline interface is on loopback
Hi,Sorry for my poor english.hope it will understand.I inserted SPCI card in my linux serverand connceted 1,2 and 3,4 ports with cross cable. i conected to the server and How can i check line...
View ArticleNot receiving GCEV_EXTENSIO events for incoming DTMF (HMP)
Hello everyone,for the last days I am trying to receive extension events for incoming DTMF using SIP. I have read the global call for IP documentation, specifically section 4.16.My code is roughly...
View ArticleHMP Voice Activation Detection / Silence Detection / Compression
Can anyone tell us whether the default configuration of HMP 3.0 has all Voice Activation Detection and any silence detection/ compression turned off?It appears to us that it is by looking at the...
View ArticleIPERR_TXRXRESOURCESINSUFF on gwAnswerCall
Hi there, when answering a call in my GCEV_ACCEPT handler I get this CCLIB errorcode from the result info in a GCEV_TASKFAIL event. Sometimes after starting HMP I can get one call answered, then I...
View ArticleMigrating from ISDN to SIP, C++ to .Net
I am migrating a VC++ 6 voice server application (Windows), which is using HMP 3.0 API and ISDN infrastructure, into a .Net application. The main purpose of migration is replacing ISDN calls with a SIP...
View Articleipm_Listen synchronization object timeout
Hello.Using HMP 3.0 SU361 on Windows 2008 R2.After reboot having the following issue: 05/05/2016 09:36:34.325 6060 10020 libipm_ipvsc EXCE Ipmedialib ipmB1C261...
View Articleuser to user message
hi at all,i work with dialogic sr511.i have connected 2 systems via crosscable and everything works finenow and i want to send a user message from sys1 to sys2 within the setup message so that sys2 can...
View ArticleThe demo have not received Unbolock event
Hi, I am beginner developer. I have install DNI310TEPE2HMP board. I run the gc_basic_call_model demo for ISDN.The configuration parameters are as...
View Articlecall function in synchronize mode
Hello team,I start learning HMP few months ago.I have a problem, if i want to call gc_AcceptCall and not want to get or handle its event (GCEV_ACCEPT) than what i do??
View ArticleRFC2833 Hookflash event
Is there any mechanism for sending RFC2833 Event #16 (Flash) using Globalcall with HMP 3.0 Windows?
View ArticleProgram crash while calling sr_waitevt().
Hi there.I am using HMP 3.0 SU 361 on a Windows 7 64-bit, with a DNI board (connecting to an ISDN PRI) and 30 fax license.My program is using the asynchronous poll mode (SR_MODEID = SP_POLLMODE,...
View ArticleFACILITY Message
Hi, I am beginner. The old application is use Dialogic CT ADE to send facility message, The old trace log as below: IE:[04] BEARER_CAPABILITY (l=3) 80 90 a2 | IE:[18] CHANNEL (l=3) a9 83 89 ->...
View ArticleDialogic card D/600JCT-2E1 compatible with hp server (HP DL360 G9, HP DL380 G9)
Hello.Now i using below servers.- HP DL360 G9- HP DL380 G91. is Dialogic card D/600JCT-2E1 compatible with these models?2. If i can use, Should i install Dialogic card D/600JCT-2E1 with edge connector?...
View ArticleCannot drop primary call on GCEV_XFER_CMPLT
Hi there,currently I am fighting my way through call transfers.My problem is one the "B-side". I am receiving a GCEV_REQ_XFER event, accept the transfer and on GCEV_ACCEPT_XFER make the call to the...
View Articleerror while installing SpringWare Software ( Intel(R) Dialogic(R) System...
error while installing SpringWare Software ( Intel(R) Dialogic(R) System Release 5.1 Feature Pack 2 for Linux)Hi, Good morning, I have installed Debian Lenny 5.0 with kernel version 2.6.26, when i...
View ArticleEnabling SRTP for regular phone calls
Hi!In the HMP 3.0 Windows documentation it mentions that it:"Supports SIP, SIP TLS, Secure RTP and DTLS-SRTP"The only examples of using Secure RTP I've found are when using ipm_StartMedia() to stream...
View ArticleHost ID on Loopback adapter?
We are experimenting with putting Dialogic HMP drivers with VoiceGuide IVR on an Azure IaaS Windows server. It seems to be working fine, but I just learned that the MAC address (and thus the Host ID)...
View ArticleVmware 6.0
Can anyone tell me if HMP SU361 is supported on VMWare6.0 as a VMWare “Virtual machine version 11” running Windows 2012-R2?
View Article