HMP Initialisation problem
Hi,I have errors when initializing the HMP card and associated channelsI use HMP in SIP protocol.I have attach the log file.Can anyone help me?Thank you in advanceBest regards Yvan
View ArticleHMP3.0 SU 393 Initialization problems
Hi, I have errors when initializing the HMP card and associated channels.I use HMP (windows 2016, update 393) in SIP protocol.I have attach the log file. Can anyone help me?Thank you in advance.Best...
View ArticleDM3 Board issue (unable to find or open the PCD file gul1_qsb_4_t1cc.pcd for...
Hey All,im getting this failure to parse the pyramid.scd file error on a linux server rebuild:"Starting Dialogic(R) DM-family board(s).Loading DM3 DriverTBASSIGN: ERROR - getAllBladesByPlatform() error...
View ArticleDriver for Dialogic® D/4PCIUF Media Board for Windows 10
Hello, We have at office Dialogic® D/4PCIUF Media Board card that was used in an old machine. The server was upgraded to Windows 10 OS or Windows Server 2012/2016/2019, and we want to configure the...
View ArticleHMP device could not be found
Dialogic HMP get installed perfectly but when I run the Configuration Manager to start the system does not detect any device. Why is happening this?System: Windows Server 2012 R2 SP1 (Build 7601)
View ArticleDialogic DMV 1200 - PCI Express (4E1) Show On DCM But Not Started
Hi, dear friends and colleaguesI Have a Dialogic DMV 1200 - PCI Express (4E1).I Install drivvers And DCM With System Release 6.0 PCI for Windows® Service Update 2271.Show my Board In DCM But Not...
View ArticleDialogic Drivers on Windows 7/10
The installation is good and the card is handling incoming calls. When I reboot the computer the drivers are no longer recognized. Please help.
View ArticleError D4/PCIU with Windows 7/10
The card driver for D4/PCIUF is installed correctly and VoiceGuide is handling incoming calls, reboot the computer and the drivers are no longer recognized.Attempted a fix but no luck.
View ArticleStreaming problem with 3PCC mode.
Hello,I have a problem with 3PCC mode.I am with a SU393 version.I was working before in 1PCC mode and I switched to 3PCC mode because I wanted to manage SDP fields.I have an application that answers an...
View ArticleTAPI wave/in and wave/out device under Windows 10 pro
Hello,i have the problem when i want to use TAPI 2 & 3, i always get the same device id's for "wave/in" and "wave/out". So when i want to capture (transmit) audio i.e. by an voicebox, the audio...
View ArticleSET HEADER SIP AFTER Response 4xx
Hi,I need to set SIP header after receive response to INVITE with 4xx code.I work in 3PCC mode and with SU 395When i receive this code, i call gc_dropCall and HMP send automaticaly ACK paquet. I need...
View ArticleConvertDM3ResultToR4Error: RESULT_COMPONENT_ERROR
Trying to get HMP 3.0 SU 395 running on a windows 2019 standard server. Formally ran HMP on server 2008r2.I get these errors in the log when i try to intiate a call (seems to connect, just no voice...
View ArticleVulnerabilities in Dialogic HMP for Windows Service Update 395 installer
Hi All,We use dialogic HMP for one of our product. Recently we found that Dialogic HMP for Windows Service Update 395 installer includes and installs FlexNet. It is used by Dialogic Standalone License...
View ArticleChange RTP Port
Hi,I would like to change the range ports used for RTP and RTCP in HMP, it is possible?
View ArticleDialogic HMP 4.1 On Centos 7.6 / 7.7
HelloI am trying to install HMP 4.1 onto Centos 7.6 running on a VirtualBox VM. There are no Dialogic hardware cards as I am using the IP interfaces, the problem seems to be that the HMP is not seeing...
View ArticleError while starting DM IP601-2E1-PCI-100BT
Hi,I have the following Dialogic board: DM/IP601-2E1-PCI-100BT (2x ISDN30 and 1x LAN). I use Dialogic System Release 5.1.1 Feature Pack 1 Service Update 136 @ Windows 2000 SP 4.I wan't to make a SIP...
View ArticleD/600JCT-2E1 Power Req
Hi,Running a server 20008 R2 with D/600 card and suddenly after reboot of server i getPower Requirement was not met but the user had the power override on, for board in slot 0, bus 4, Power Required is...
View Articledx_getxmitslot error=0x6a Invalid Switching Handler Bus Mode
I need help learning how to figure out problems as I dig into developing an HMP layer for our system. I've download several demos, worked for days to get them to compile in VS 2017, and then found...
View ArticleHMP 4.1 ipmedia start failure
Hi all,I have a strange behaviour with a new HMP 4.1 installation (SU 272). Installation completed successfully, and ipmedia starts with the standard demo license. Anyway with a permanent purchased...
View ArticleClik here to view.
Retrieving P-Asserted-Identity and Remote-Party-ID from SIP Message headers
Apologies for the length of this question.Some background; I have an application in which the user for a telephone is emailed the call details (caller, length of call etc) after the call is completed....
View Article