gc_SetUserInfo() fails
I have used parts of the demo program including the gc_set_channel_codecs() function. When I call gc_SetUserInfo() fails. It returns with -1. The parameters seems to be OK...Any idea why? I am using...
View ArticleSIP: How to change or remove QoS attributes in the SDP OK status
Dear Ladies and Gentlemen,We are creating an application to handle incoming calls by means of the system default behavior. Everything goes ok until some callers send us QoS attributes in the INVITE...
View Articlegc_MakeCall() fails IPERR_BAD_PARAM
Hi,I have a problem while calling the gc_MakeCall() API. It fails with the following error.12/14 11:52:52.811 [GC_APIERR]: gc_MakeCall(linedev=1, numberstr=SIP:0526726565@82.166.90.3, mode=EV_ASYNC)...
View Articlegc_MakeCall() API fails when using the EV_SYNC,parameter
Hi,When I run the gc_basic_call_model demo project and the gc_MakeCall() API is called using the EV_ASYNC parameter, the outgoing call is successful, however, when I use EV_SYNC, the API fails. Any...
View ArticleThe GCEV_OPENEX event is not received in the process_event() function
Hi,I have used the demo project as a skeleton for my program.Any idea why the GCEV_OPENEX is not received in the process_event() function?As far as I can see the device was opened successfully .Thank...
View Articlegc_basic_call_model - how can I generate an outgoing call?
Hi,I am using the gc_basic_call_model demo project using SIP technology.Can you tell me what is required to generate a phone call? The demo project automatically generates a phone call. Assuming I...
View ArticleGlobal call - dx_play() sample?
Hi,Is there a sample code that demonstrates dialing and playing a wave file?Thanks.Mike
View Articlegc_hmp_hold_retrieve demo project - the call is successful but the voice file...
Hi,I am running the gc_hmp_hold_retrieve demo project using SIP technology. The call is initiated, the phone rings, I pick-up the phone but I don't hear the voice file - music.pcm.See the log...
View ArticleHMP 4.1 su213 ssp_x86Linux_boot: null_cfsp.c: losing data.
Hi all,we're experiencing the message “ssp_x86Linux_boot: null_cfsp.c: losing data.” in var/log/messages with HMP 4.1 SU213 installed on Linux RHEL 7.2. The system is installed on a ESXi virtual...
View ArticleNET5 protocol on DMV1200 problem
I have two E1 links , one from PSTN and one from Ericson PBX.I used CTR4 protocol for both links and D/600 board worked fine.Now I changed my board to DMV1200 (DM3 board) and changed protocol to...
View ArticleSend and Receive Fax on HMP
HiIs there any fax resource license for HMP?can I send and receive fax with HMP and no physical board ?
View ArticleKB4056892 Causes Access Denied for HMP
Installing KB4056892 causes DCM to report errors:Failed to get installed families(s)Access is deniedFailed to get the system modeAccess is deniedWindows 10.0.16299.192Dialogic SU375
View ArticleClik here to view.
DCM error - The system is in start/stop pending mode...
Hi,When I start the DCM program, I get the following error. Any idea why and how to fix?Thanks.Mike
View ArticleWindows update
Hi all,Could anybody help me with 4 port Dialogic analogue module. Problem appears after windows update. After Windows update Dialogic sometime stop open ports and answer to calls. After restart of...
View ArticleDTMF bounce?
I've been having a few problems with a D/480JCT-2T1 card; for some reason, there is an unrealistically high bounce rate on DTMF detection with dx_getdig(). For example, if I tell it to receive 11...
View Articleafter GCEV_CONNECTED, how to send DTMF in HMP windows
Currently I have an HMP SIP application based on C++ which makes an outbound call. But Is there any way to dial an extension number or some authentication for example user id once I got GCEV_CONNECTED...
View ArticleIncluding User-Agent header on ACK during outbound call setup
Hello, I have a 1PCC application using HMP Windows. We are interfacing to a PBX which requires that all SIP messages generated by HMP include a User-Agent header. I set a User-Agent header using...
View ArticleDTMF in 183 Session in Progress
Hi,When somebody makes a call to HMP (linux relase ) after i send 183 Session in Progress is it possible to get DTMF before 200 OK ? After i answer the call with 200 OK it works ,but i would like to...
View ArticleH.100 bus between different cards?
Can an H.100 bus be shared between JCT cards and other card types, such as a NMS CG6565e? If so, can anyone share a configuration example? The Natural Microsystems card seems to see the A clock coming...
View ArticleMRCP v2.0 client library use
Hi,Could you help please?I have to implement support for ASR and TTS. Knowing that HMP 3.0 does not have such library and we have to make MRCP client based on third party MRCP v2.0 library, but what...
View Article